hp mobile data protection sensor код 48
Ошибки акселерометра в ноутбуках HP
Сталкиваясь ошибкой акселерометра на устройстве HP, переживать не стоит. Это не серьёзная проблема с драйвером, которую несложно устранить. Для восстановления нормальной работы существует несколько способов, каждый из которых будет рассмотрен далее.
Само по себе программное обеспечение акселерометра является частью системы HP 3D DriveGuard, которая защищает жесткий диск ноутбука во время падения. Регистрируя внезапное линейное ускорение, акселерометр отправляет накопителю команду прекратить все операции ввода-вывода и припарковать считывающую головку.
Обычно ошибка появляется после обновления Windows, особенно 10-й версии. В процессе установки обновлений могут повреждаться файлы драйвера или теряться совместимость.
Способы решения проблемы
Существует три способа избавления от ошибки:
Выполнение каждого из приведённых способов не займёт много времени, но один из наверняка поможет устранить проблему.
Обновление Windows
Обновление существующего драйвера
Ручное удаление с переустановкой
Вполне вероятно, что два предыдущих способа с ошибкой не справятся. Тогда остаётся выполнить все необходимые операции по замене драйвера вручную. Для удаления драйвера подходит инструкция из предыдущего раздела, только вместо «Обновить» следует выбрать «Удалить».
После этого понадобится перезагрузить компьютер, а затем скачать и установить последнюю версию драйвера HP 3D DriveGuard. К примеру, с официального файлового хранилища HP. После этого останется только перезагрузить компьютер, после чего проблема будет устранена.
У меня HP 6390p, SSD, Windows 8.1. Мне не нужна защита HDD, кроме того драйвер hpdskflt.sys конфликтует с программой SPDT и вызывает BSOD. В BIOS нет возможности отключить Acceleration Sensor или HP 3D DriveGuard. Как отключить или удалить HP Mobile Data Protection Sensor?
I have the same model 6930p with an Intel 530 SSD and mine works just fine on W8.1 and W10.
What you need to do is to go into the windows control panel>programs, uninstall a program.
Find the HP 3D driveguard software and uninstall it.
Then go into the device manager, click to expand the system devices category, right click on the HP mobile data protection sensor.
Select Uninstall and check the uninstall driver box.
Then restart the PC and you should have an Unknown device listed in the device manager.
You can either leave it that way, or just install the driver to install the device, without the 3D driveguard software as follows.
Download and install this free file utility. The 2nd file at the top of the page is for 64 bit.
Download and save, but do not run this W8.1 HP 3D driveguard driver.
Right click on the sp64144.exe file you saved, and select 7-Zip from the list of items on the menu.
Have 7-Zip extract to: and let it extract the file into its folder name (sp64144).
After that is done, go to the device manager, click on the unknown device needing the driver.
Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option, and browse to the driver folder that 7-zip created.
Make sure the Include subfolders box is checked and the driver should install.
Then restart the PC, and your problem should be solved.
HP Mobile Data Protection Sensor Code 48 on Windows 10
Здравствуйте.
У меня HP ProBook 4540S, я установил на его Windows 10 Pro x64 1903. После установки системы, я установил все драйвера и драйвер HP Mobile Data Protection Sensor выдает Code 48, и я ни как не могу это исправить. Не могли бы вы подсказать как это исправить?
Заранее благодарю Вас. Жду вашего ответа.
Hello.
I have an HP ProBook 4540S, I installed Windows 10 Pro x64 1903 on it. After installing the system, I installed all the drivers and the HP Mobile Data Protection Sensor driver generates Code 48, and I can’t fix it. Could you tell me how to fix this?
Thank you in advance. Waiting for your reply.
The W10 driver doesn’t work on the HP Mobile Data Protection Sensor hardware revision your notebook has.
You need to manually install the Windows XP 64 bit driver from the support page.
Start by deleting the W10 driver, and software again.
Try and get back to where the accelerometer is listed as an unknown device.
Download and save this driver but do not run it.
Download and install this free file utility. The 2nd file at the top of the page is for 64 bit.
After you install 7-zip, right click on the XP 3D driveguard driver file you saved.
Select 7-Zip from the list of items on the menu.
Have 7-Zip Extract to: and let it extract the file into its folder name (sp58201).
After the driver folder is created, go to the device manager, click on the problem accelerometer device needing the driver.
Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option, and browse to the driver folder that 7-Zip created.
Make sure the Include subfolders box is checked, and the driver should install.
Then restart the PC and the error message should be gone.
HP Mobile Data Protection Sensor doesn’t work in Windows 10 Creator Update (code 48)
The HP Mobile Data Protection Sensor still worked good in Anniversary Update, but after I updated to Creators Update, it can’t be used again. This Windows 10 version of HP MDP which I downloaded in the HP’s website. I’ve reboot and even reset the PC, but the problem cannot be solved. Please help!
There is no fix for the hardware revision of the HP Mobile Data Protection Sensor your notebook has at this time.
The driver that GBL84 posted is for the newer version of the 3D driveguard, and won’t work for your model.
The lastet version of the 3D driveguard driver can be found on your notebook’s support page (sp71714).
I don’t believe that reinstalling the driver will resolve the problem.
I suggest you report the bug to Microsoft.
Or you can contact HP at the link below and report the issue.
Open the Windows Control Panel, select Programs and Features, right click the entry for the HP 3D DriveGuard, and select Uninstall.
When this has completed, restart the notebook.
When you are at the Windows desktop, download and install this version of HP 3D DriveGuard at the link below, and restart the PC.
**Click the White Thumbs Up Button on the right to say Thanks **
Make it easier for other people to find solutions by marking a Reply ‘ Accept as Solution’ if it solves your problem.
I am not an HP Employee
It’s a safety feature related to the hard drive. If the Mobile Data Protection Sensor detects your notebook is falling, it instructs the HDD to park the drive heads in an attempt to prevent damage to the drive.
I’ve installed Windows 10 Technical Preview on several machines and not found any issue with this, although it’s possible you may need to install an updated driver ( this is provided by HP 3D DriveGuard software ) when you upgrade to 10.
Use same steps as provided earlier
**Click the White Thumbs Up Button on the right to say Thanks **
Make it easier for other people to find solutions by marking a Reply ‘ Accept as Solution’ if it solves your problem.
HP Mobile Data Protection Sensor is not compatible with Windows 10 (code 48)
driver is blocked by Windows 10 and adviced to look at HP for new drive. HP doesn’t give a newer one nor a solution for this hardware problem.
Device ACPI\HPQ6000\3&b1bfb68&0 requires further installation.
De installatie van stuurprogramma accelerometer.inf_amd64_be82e2621da4b281\accelerometer.inf voor apparaat-id ACPI\HPQ6000\3&B1BFB68&0 is voltooid door Stuurprogrammabeheer met de volgende status: 0x0.
(sorry comment in system is in Dutch version Windows)
Please try the following fix
BH
***
**Click the KUDOS thumb up on the left to say ‘Thanks’**
Make it easier for other people to find solutions by marking a Reply ‘Accept as Solution’ if it solves your problem.
Thanks for your answer, but I already tried this driver/app.
The answer of Windows is: This app cannot be execute on this PC.The acccelorometer doesn’t work on this version of Windows. Possibly there is an worked arround version available.
Windows 10 home: version 1709: build 16299.192
There is no fix that I know of and it has been this way for at least a year or so.
See if this works to at least install the hardware.
Go to the windows control panel, find the HP 3D driveguard software and select Uninstall.
Then download and save, but do not run the W10 3D driveguard file from your notebook’s support page.
Download and install this free file utility. The 2nd file listed at the top of the page is for 64 bit.
After you install 7-Zip, right click on the driver file you saved.
Select 7-Zip from the menu.
Have 7-Zip extract to: and let it extract the file into its folder name (sp#####).
Once that is done, go to the device manager, click on the unknown ACPI\HPQ6000 device.
Click on the driver tab. Click on Update driver.
Select the Browse my computer for driver software option, and browse to the driver folder 7-Zip created.
Make sure the Include Subfolders box is checked, and see if the driver installs that way.
Then restart the PC.
If that doesn’t work, then nothing will.
This way I was able to install driver but not from mentioned SoftPaq.
I guess it was SP81142.
Driver version is 6.0.20.1
I could fix the problem in my old HP Pavilion dv6-1050us Etertainment Notebook PC thanks to you.
In my case the problem was related with two components of this device that had a problem, then I downloaded SP61037 and I unzipped it manually. Then I ordered to update components from the Device Manager and this was the result, with no conflicts at this time:
But now my question is. what if I install SP61037 because at this time I have no HP 3D driveguard software installed.